Daewoo Forums and Owners Club

[font=Impact][font=Courier][size=medium]

HI GUYS

CAN ANYONE TELL ME OR BETTER STILL EMAIL A PIC OF THE TIMING MARKS ON A TWIN CAM ESPERO - FURTHER I CANT SEE ANY MARKS ON THE LOWER PULLY SO ANY TIPS APRECIATED TO ALIGN ALL THREE

REGARDS

M A R T I N

[/size][/font][/font]

Sorry about quality of picture.

line up rear cam so that timing mark I is lined to the 3 O'clock position in line with gasket face of the head then line up the E mark on the front cam to the 9 O'clock position in line with gasket face and the crank mark to 6 O'clock position slacken water pump remove belt fit new belt and tensioner keeping belt taught on none tensioned side lightly tighten and rotate water pump so that the pointers on the tensioner are in line and tighten water pump bolts to 8 Newton meters rotate engine by hand recheck timing and tensioner all should be lined up. at this point it would be a good idear to recheck the tightening torq of the tensioner and water pump.