Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fitting keyless entry?
Author Message
NickWalton Offline
Junior Member
**




Posts: 3
Joined: Oct 2008
Post: #1
Question Fitting keyless entry?
Ok, So I'm new Biggrin

I've got a Matiz SE+ that already has central locking fitted, but no keyless entry. I've looked through as many service manuals / wiring diagrams as I can find but I've still no idea where I need to be connecting such a kit in the car.

Has anyone got some ideas on this? Ideally a step by step guide would be brilliant Smile

Nick W
16-10-2008 09:53 PM
Find all posts by this user Quote this message in a reply
Bodie Offline
Administrator
*******

EX owner of 1998 (S) Poly Silver Daewoo Matiz SE+
Melton, Suffolk

Posts: 9,885
Joined: Oct 2007
Post: #2
RE: Fitting keyless entry?
HELLO to ya. Best bet is to do a search online for laserline as these were the remote central locking fobs n kits fitted to the Woo'sThumbsup

Now go th othe newbies section & say HELLO to everyoneBiggrin

BODIE

[Image: 24vqh06.gif]

[Image: signnh.gif]
Are you new to daewooclub.co.uk? If yes your first point of call is the Newbies area to say HELLO!

16-10-2008 09:56 PM
Find all posts by this user Quote this message in a reply
NickWalton Offline
Junior Member
**




Posts: 3
Joined: Oct 2008
Post: #3
RE: Fitting keyless entry?
Hey,
Thanks for the reply. I've had a look around but I can't seem to find any? I recall reading somewhere on these forums that the Matiz 0.8 has no locking relay, any idea if this is correct? If so, where would I go about connecting the cables from a remote locking module?

Thanks
21-10-2008 05:56 PM
Find all posts by this user Quote this message in a reply
nelse Offline
Senior Space Cadet
******

--
rotherham south yorkshire

Posts: 1,283
Joined: May 2008
Post: #4
RE: Fitting keyless entry?
I think the way the central locking works on the se+ is from the cdl solonoid on the drivers door, so you would need to get a remote system that will send a positive feed to the relevent wires to the cdl solonoid..

nelse

http://www.logixautocentre.co.uk
ITS BETTER TO DIE TRYING THAN NOT TRIED AT ALL
22-10-2008 09:49 PM
Visit this user's website Find all posts by this user Quote this message in a reply
lube-o-rific Offline
Howlin' Mad!
*****

2008 Focus ST
Coventry, Midlands, UK

Posts: 2,637
Joined: Feb 2008
Post: #5
RE: Fitting keyless entry?
A Toad system is a bit overkill for a Matiz, I would try a simple Laserline system Biggrin
11-11-2008 03:41 PM
Visit this user's website Find all posts by this user Quote this message in a reply
Sweetnemesis Offline
Moderating Goddess
******

Escort XR3i Cabriolet
in your dreams

Posts: 5,861
Joined: Jul 2007
Post: #6
RE: Fitting keyless entry?
(11-11-2008 05:33 PM)matizownersclub Wrote:  probally but its what i have fitted depends if you want the security too.

I know you can get cheap kits on ebay though that do keyless entry not ever tried one though.

How much does a Toad system cost Mark?

I might consider one for mine

[Image: M_mid_RGBb.jpg]

Make a difference here
11-11-2008 09:31 PM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump: